Cablein Technology Co., Ltd.
Add to Cart
| Pins Number | 2Pins | 3Pins | 4Pins | 5Pins | 7Pins | 9Pins | 12Pins |
|---|---|---|---|---|---|---|---|
| Rated Voltage | 500V | 250V | |||||
| Rated Current | 20A | 10A | 5A | ||||
| Insulation voltage | 2.5KV | 1.5KV | |||||
| IP CODE | IP68 | ||||||
| Cable Jacket OD | Standard Power:⌀8-12mm Standard Signal :⌀5-6.5mm Other:⌀5-9mm | ||||||
| Assembly cable diameter | 2.4-4mm²/14-12AWG | 1-1.5mm²/18-16AWG | 0.34-0.75mm²/22-20AWG | ||||
| Ambient temperature | -40℃~+80℃ | ||||||
1.The '6' (first digit) indicates complete protection against dust and other solid particles.
2.The '7' (second digit) means the connector can withstand immersion in water up to 1 meter deep for 30 minutes without any harmful water ingress.
In practical terms, this makes the connector ideal for outdoor use, harsh environments, wash-down areas, or any application where exposure to rain, spills, or temporary submersion is a concern.
Yes, absolutely. The 7-pin design offers excellent versatility. You can configure the pins to carry both power and signals within a single, streamlined connection. For example:
Several pins can be dedicated to transmitting power at the rated 10A current.
The remaining pins can be used for signal transmission (e.g., data, sensor readings, control commands).
Please note: The 10A rating typically refers to the current per pin. The maximum voltage is a separate specification. You must consult the product's technical datasheet for the specific voltage rating (e.g., 250V AC/DC) to ensure it is suitable for your application's electrical requirements.
Q:What is the purpose of the Strain Relief Boot, and is it necessary?
The Strain Relief Boot is a critical feature for durability and reliability, not just an accessory. Its primary purposes are:
Prevents Cable Pull-Out: It mechanically secures the cable to the connector body, absorbing any physical tension or pulling forces. This prevents the wires from detaching from the internal solder points or terminals.
Protects Against Bending: It reduces stress at the connection point by preventing the cable from bending at too sharp an angle, which can break internal conductors over time.
Extends Service Life: By protecting against everyday wear and tear, vibration, and accidental tugs, it significantly extends the life of both the connector and your cable assembly. It is highly recommended for any application involving movement, vibration, or rough handling.